Physical specification
Housing material : Aluminium housing, Plastic plate dimensions: 74 x 83 x 25 mm (L x W x H), Weight: 125g
Operating environment
Operating temperature: 40 C to 75 C, non-condensing operating humidity: 10% to 90%.
Mounting options: DIN rail mounting slots at bottom and side, IP30 310000
Installation
The modem is installed on a DIN rail supplied.
Power is supplied either via the supplied power supply unit or looped-through power from the Enterprise Controller ( Vcc+ | Vcc- ).
Systems ordered with the 4G modem option do not require any further configuration.
If your modem is not supplied pre-installed and configured, please proceed as follows:
- Press the SIM button with the SIM pin.
- Pull out the SIM holder.
- Insert your SIM card into the SIM holder.
- Push the SIM holder back into the router.
- Attach the mobile phone and WiFi antennas.
- Plug the power adapter into the socket on the front of the machine. Then plug the other end of the power adapter into a wall socket.
- Connect to the machine wirelessly using the SSID and password on the machine's information label, or use an Ethernet cable connected to the LAN port.